Campus News

Medical school mockup passes weather testing

facade of new med school.

The primary components of the building tested while at the Construction Research Laboratory in Miami were a glass curtain wall and its high-performance terra cotta rainscreen. Photo: HOK

By ELLEN GOLDBAUM

Published March 26, 2015 This content is archived.

Print
“The building mockup passed with flying colors. ”
Jennifer Kuhn, project manager
medical school construction project

Starting in April, beams of steel will rise at the construction site at the corner of Main and High streets in downtown Buffalo, providing passersby with their first glimpse of the new School of Medicine and Biomedical Sciences, which will open in 2017.

But earlier this month, personnel from UB, LPCiminelli, HOK and Gilbane/Liro got a sneak peek while at the Construction Research Laboratory in Miami, where a 30-by-36-foot mockup of part of the building’s facade was constructed.

It took several weeks to construct the mockup, which then was subjected to simulations of powerful rain and windstorms to see how the building’s exterior will hold up against the elements.

“The building mockup passed with flying colors,” says Jennifer A. Kuhn, project manager for the new medical school building. “This kind of testing is only done on very large, complex projects.”

The primary components tested were a glass curtain wall and its high-performance terra cotta rainscreen. The glass walls and skylights will naturally illuminate the new medical school’s signature feature, a light-filled, six-story glass atrium that will join the building’s two L-shaped structures. A fly-through video of the interior, made by HOK, is available here.

“Fewer than approximately 10 percent of buildings constructed in the U.S. undergo such testing,” says Michael Drozdowski, project manager with Gilbane/LiRo, the construction manager for the project. “If you tested every building in the nation like this, the majority would fail. These are very rigorous, comprehensive tests that are typically done only on very large, custom projects.” He was onsite at the testing lab for most of the testing, which ran from mid-January to early March.

It took 15 workers from LPCiminelli and their subcontractors about a month to construct the mockup. They used the same glass and terra cotta panels that will comprise the building’s curtain wall, the exterior “skin” of modern, high-rise buildings that maximizes light-penetration, thermal-efficiency and water-diversion functions.

“We do this kind of performance testing on complex projects so we can provide assurance that the exterior wall as constructed will perform to all the criteria that the architects and engineers are expecting,” Drozdowski explains.

Wind-pressure testing involved using an engine repurposed from an airplane. “As its name suggests, High Street is one of the tallest points in the city of Buffalo, so it’s a fairly high wind pressure area,” notes David Schwartz, principal and senior project manager at HOK, the firm that designed the medical school. “For that reason, the building was tested to the maximum wind pressure that the site will realize: sustained winds of up to 50 or 60 miles per hour. We also modeled wind pressures to make sure that the building will be comfortable for pedestrians entering and leaving the facility.”

How wind may affect the weight of snow drifts on the building’s rooftops during and after Buffalo’s snowstorms was studied earlier.

The panels take advantage of local manufacturing expertise: They are being custom-made by Boston Valley Terra Cotta in Orchard Park, which, Schwartz points out, is one of the premier firms in the country that manufacture these panels.

“Terra cotta was selected for a variety of reasons,” says HOK’s Schwartz. “It reflects and acknowledges the history of Buffalo’s architecture with colors emulating those on the Frank Lloyd Wright Darwin Martin House. The terra cotta panels also have an appealing, hand-made quality.”

Schwartz explains the rainscreen is designed to allow rainwater to fall behind the terra cotta panels while reducing the pressure against the building so that if wind blows rain into the panels, the water will simply drain out at the bottom and away from the building.

“We were trying to force it to leak,” Drozdowski adds, “trying to create the worst-case scenario so we can make any necessary modifications before beginning construction in Buffalo.”

Even though off-site testing is complete, additional testing on the building will continue at the site. “All of this testing ensures that the quality control that occurred while we were at the testing lab will be the same quality control in Buffalo,” Drozdowski says.

After a crawler crane is installed in early April and the steel is delivered, steel erection will begin for floors 1 through 3. The 280-foot tower crane is expected to be erected in July to allow for construction of floors 4 through 8. Steel construction will take nearly all of 2015. The exterior envelope of the building will begin to be installed in late 2015 and will extend into 2016.